STATE & ABPA CERTIFIED BACKFLOW TESTER

Backflow Testing in St. George & Washington County

Annual testing, inspection, maintenance, and the paperwork handled by a certified tester who knows irrigation inside and out. Stay compliant and keep your water safe.

Why backflow testing matters

Your backflow preventer is a one-way valve between your sprinkler system and the city’s drinking water. If pressure drops, it stops fertilizer, weed killer, and dirty yard water from being pulled back into the supply that feeds your home and your neighbors.

Valves wear out, seals fail, and freeze damage happens. A failed assembly looks fine from the outside. Only a certified test tells you it’s working.

It's required, every year

St. George City Code requires backflow assemblies to be tested at least once a year by a certified tester, at the property owner’s expense. Other Washington County water providers run similar programs. We’ll make sure you meet yours.

What's included

One visit. Tested, inspected, and documented.

Certified Annual Test

Full test of your assembly to Utah standards by a state-certified tester.

Report Filed for You

We submit the test results to your water provider so you're on record as compliant.

Inspection & Maintenance

If your assembly fails, we inspect it, perform the needed maintenance, and retest, often on the same visit.

Next-Year Reminder

We'll reach out when your next annual test is due. One less thing to track.

Who needs it

Homeowners

Any home with a sprinkler system and a backflow assembly.

HOAs & Property Managers

Multiple assemblies, one vendor, one schedule, clean records.

Commercial Properties

Retail, office, and multi-family irrigation systems.

Builders & New Construction

Initial certification tests for new installs and final inspections.

MEET YOUR TESTER

Nolan Jenkins

Nolan runs nearly all of Waterwise’s irrigation service work. He’s a Utah-certified backflow tester and a QWEL-certified water-efficient landscaper. That means your test is done by someone who knows the whole system, not just the valve.

✔ Utah Certified Backflow Tester (Utah Division of Drinking Water)

✔ ABPA Certified: American Backflow Prevention Association Backflow Prevention Assembly Tester

✔ QWEL Certified: Qualified Water Efficient Landscaper, an EPA WaterSense-recognized program

✔ Licensed & Insured

QWEL Qualified Water Efficient Landscaper certification logo

Common questions

At least once a year in St. George. Some providers or high-hazard properties require more often. We’ll tell you what applies to yours.

Any time of year. Many customers schedule theirs in spring, before peak watering season, so the assembly is checked before the heavy summer use. We test year-round.

We’ll show you what failed and walk you through the maintenance it needs before we start. Many assemblies pass after maintenance and a retest, often on the same visit.

Usually 20–30 minutes. Your water is shut off briefly during the test. If the assembly is accessible outside, you don’t need to be home.

Yes. We test any residential or commercial irrigation backflow assembly.

Due for your annual test?

Get on the schedule now. Spring fills up fast.